ZS55

About

KNX single or double push button with bottom and top press, with conventional appearance and smooth pressing feel. Designed in 55 x 55 format for installing together with Zennio’s ZS55 frames and sockets. KNX Soft push buttons are available as single-button or double-button versions with activation on the bottom or on both the top and bottom, depending on the model. It incorporates an internal temperature probe and a thermostat as well as an analog input to be configured as temperature probe. Thanks to the Soft push buttons, you’ll be able to integrate conventional appearance in a KNX installation, offering an outstanding haptic experience. It is compatible with KNX Secure. Accessories: temperature probe. Each KNX Soft push button 55×55 is made up of two references: KNX electronic module ⇒ Ref. ZS55SOFT Tilt cover ⇒ depending on the number of push areas and the selected design Configuration options (number of push areas): X = 1 ⇒ 1 tilt cover Y = 1 ⇒ Push area on bottom Y = 2 ⇒ Push areas on top and bottom X = 2 ⇒ 2 tilt covers Y = 2 ⇒ Push area on bottom of each cover Y = 4 ⇒ Push areas on top and bottom of each cover Available designs for tilt covers: ZS55CSOFTXY(A/S/MW/C) ⇒ Plain design without icons ZS55CSOFT11 L (A/S/MW/C) ⇒ Light icon ZS55CSOFT11 K (A/S/MW/C) ⇒ Key icon ZS55CSOFT11 D (A/S/MW/C) ⇒ Doorbell icon ZS55CSOFTXY SH (A/S/MW/C) ⇒ Shutter icons (XY = 12, 22 or 24) ZS55CSOFTXY(A/S/MW/C) C ⇒ Custom design with custom icons through Touch My Design tool Frame not included. Available with different number of buttons and number of push areas: X = 1 (single push button) / 2 (double push button) Y = 1 (tilt down for single push button) / 2 (tilt up and down for single push button and tilt down for double push button) / 4 (tilt up and down for double push button) --> Finishes: see available finishes Visit Touch My Design tool to customise your Soft push button .