About the ALLinBOX Hospitality v2

The ALLinBOX Hospitality v2 (ZPRHPV2) is a Zennio multifunction KNX device in 4.5 DIN units: a 160 mA bus supply plus a 29 V DC aux output, a KNX IP interface, two-pipe fan coil control and 6 analogue-digital inputs^[1]. In the Zennio hotel catalogue the ALLinBOX sits in the room's panel and combines bus power, an IP interface, outputs, fan coil control and inputs for sensors^[2]. The bus and the 29 V output share 250 mA at most^[1].

Fan outputs F1–F3 and valve output V, each 8 A, serve the fan coil; a separate 16 A relay takes any other load^[1]. Both thermostats are Hospitality ones, which Zennio advises only for hotel rooms^[3]. Each of the six inputs works as a binary input, a temperature probe or a motion detector^[3].

Master Light suits the usual room routine: a button by the door switches off whatever is on or, if all is off, lights one chosen lamp, such as the closest; it watches up to 30 sources^[3]. It offers up to 5 KNXnet/IP tunnels, KNX Data and IP Secure and an NTP-synchronised clock, and runs on 110–240 V AC mains, up to 75 mA at 230 V^[1]. Its housing buttons serve reset and programming; manual output control needs an IR remote in Test On mode, not included^[1].

Works with

9900024 — IR remote for manual control of the outputs in Test On mode^[1]
ZACNTCW — white 6.8 kΩ mini NTC probe, Ø 3 mm, 3 m cable, for a temperature input^[4]
ZACFATW · Flat AmbienT — Flat AmbienT wall temperature probe; not a KNX device but a probe for an input^[5]
ZPDEZINW · EyeZen IN — motion and light sensor for false ceilings, wired to an input^[6]