Zennio KNX Climate Control
30 models
HeatingBOX — heating and underfloor heating
(6)
KLIC gateways for air conditioners
(12)
ZCLDAV2
KLIC-DA v2 — Daikin-KNX gateway (Altherma LT range)
Daikin Altherma: 2-wire link up to 100 m; DIN rail, 2 units; 2 inputs
ZCLDDV3
KLIC-DD v3 — Daikin-KNX gateway (Residential range)
Daikin residential: S21 connector, ~70 cm cable; 39 × 39 mm, back box or panel; 2 inputs
ZCLDIV2
KLIC-DI v2 — Daikin-KNX gateway (SKY and VRV range)
Daikin VRV and SKY: 2-wire link up to 100 m; DIN rail, 2 units; 2 inputs
ZCL-FJ
KLIC-FJ — Fujitsu-KNX gateway
To the indoor unit board over 3 wires (R-W-B), cable up to 30 m; 3 inputs
ZCLFJT
KLIC-FJT — Fujitsu-KNX gateway
To the unit's UART connector (usually CN65), ~70 cm cable; KNX Data Secure; 2 inputs
Fan coils and 0–10 V
(8)
Ducted air conditioner zoning
(2)
Multi-room climate: MCC, KIPI-RC
(2)
Mounting and accessories (7)Back boxes, terminals, adaptors, licences and spare parts of this section. They are not cards of the grid — each has its own page.
- ZAC-INMITTInput, KLIC-MITT and KLIC-DD3 (4 Poles)
- 9900054Input terminal block for KLIC-MITT v2, KLIC-DD v3 and KLIC-MITTE (3 Poles)
- 9900055Input and communication, KLIC-FJ (7 Poles)
- 9900056Input and communication, KLIC-LG1 (7 Poles)
- 9900057Input and communication, KLIC-TS (7 Poles)
- 9900058Input and communication, KLIC-PA (7 Poles)
- 9900019IT signal adapter for KLIC-MITT through CN100 connector
ZENNIO Climate Control: section overview
This section holds 30 models of Zennio KNX climate equipment. Besides the gateways for Daikin, Mitsubishi Electric, LG, Fujitsu, Toshiba, Panasonic and Samsung, there is KLIC-MDI for Midea air conditioners, ZoningBOX for ducted air-conditioner zoning, FANinBOX for ceiling fans, MAXinBOX FC 0-10V for fan coils, and MCC and KIPI-RC for multi-room climate. KLIC-series gateways connect air conditioners and heat pumps to the KNX bus: residential Daikin and Mitsubishi Electric units, LG, Fujitsu, Toshiba and Panasonic units, industrial Daikin VRV/SKY (KLIC-DI v2) and Samsung VRF (KLIC-SG), and Daikin Altherma (KLIC-DA v2) and Mitsubishi Ecodan (KLIC-MITTE) heat pumps. Some gateways plug into a connector on the unit's board (S21 for KLIC-DD v3, CN105 for KLIC-MITT v3), while KLIC-DI v2, KLIC-SG and KLIC-DA v2 mount on a DIN rail and link to the unit over a 2-wire line of up to 100 m. HeatingBOX 230V actuators (2, 4, 6 or 8 outputs with A/D inputs) and HeatingBOX 24V drive heating thermal actuators. For fan coils there are MINiBOX 0-10V X1/X2/X3, MAXinBOX Hospitality v3 for 2/4-pipe systems with two extra outputs, and ALLinBOX Hospitality. Room temperature for climate control comes from the Flat Sensato v2 and Flat AmbienT / SQ-AmbienT sensors in the Sensors section.
Frequently asked questions
What should control fan coils in a hotel?
MINiBOX 0-10V (1–3 channels of 0–10 V) and MAXinBOX Hospitality v3 for 2/4-pipe systems with 6 A/D inputs are designed for fan coils. ALLinBOX Hospitality combines 2-pipe fan-coil control, a 160 mA KNX power supply and a KNX-IP interface, and handles climate control for up to 2 rooms.
How to buy Zennio KNX climate equipment in Kazakhstan?
We are the official Zennio distributor in Kazakhstan and deliver equipment nationwide; it carries the manufacturer's warranty. Request a quote via the contact page or the specification configurator on this site.